When we select wheels in a skateboard store, we can see that the skateboard wheel company will indicate the diameter and hardness of the wheel on the package of each set of wheels. We can choose the appropriate wheel based on the information given by the skateboard wheel manufacturer.
is generally marked with words such as 95A, 100A, 80B on the outer packaging of the skateboard wheel, which indicates the hardness of the wheel. The higher the number in front, the harder. For example, a 100A wheel will be harder than a 95A wheel. The hardness of the wheel represented by B will be 20 points greater than that of A, that is to say, the hardness of the wheel of 80B is equivalent to the hardness of the wheel of 100A.
If you like to brush the street, you often have to deal with the impact of rough roads, small stones, small wooden sticks, and small cracks. The soft wheels with hardness between 75A-85A will let you better experience the feeling of chasing the wind. Harder wheels can provide more jumping heights. Grind performs better on props and is easier to slide. It is suitable for various tricks. If you are an out-and-out street skater, hard wheels of 95A and above are your better choice. The hardness of 01A is generally the choice of experienced skaters who particularly like Grind and Slide.
If you like to practice all kinds of movements and often have to brush the street, wheels with hardness between 88A-97A are very good. The width of the contact surface between the wheels and the floor is also important. A larger contact area will distribute the weight to a larger area, which means that the wheels are easily slowed down. Therefore, many wheels have rounded edges to reduce the width of the contact surface, making the wheels easier to rotate and slippery. Faster. The smaller the width of the contact surface, the easier it is for the wheel to slide sideways, so it is not suitable for novices. The width of the contact surface is very large, very close to the width of the wheel itself. When performing prop actions, such as the 5050 on the pole, it will lock more tightly.